# This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback auto eth0 iface eth0 inet dhcp # VBoxNetwork: neta auto eth1 iface eth1 inet static address 192.168.1.11 netmask 255.255.255.0 network 192.168.1.0 broadcast 192.168.1.255 post-up route add -net 192.168.0.0 netmask 255.255.0.0 gw 192.168.1.1 dev eth1 pre-down route del -net 192.168.0.0 netmask 255.255.0.0 gw 192.168.1.1 dev eth1 # VBoxNetwork: netd auto eth2 iface eth2 inet static address 192.168.4.41 netmask 255.255.255.0 network 192.168.4.0 broadcast 192.168.4.255 post-up route add -net 192.168.5.0 netmask 255.255.255.0 gw 192.168.4.1 dev eth2 post-up route add -net 192.168.6.0 netmask 255.255.255.0 gw 192.168.4.1 dev eth2 pre-down route del -net 192.168.5.0 netmask 255.255.255.0 gw 192.168.4.1 dev eth2 pre-down route del -net 192.168.6.0 netmask 255.255.255.0 gw 192.168.4.1 dev eth2 # VBoxNetwork: netg auto eth3 iface eth3 inet static address 192.168.7.71 netmask 255.255.255.0 network 192.168.7.0 broadcast 192.168.7.255 post-up route add -net 192.168.8.0 netmask 255.255.255.0 gw 192.168.7.1 dev eth3 post-up route add -net 192.168.9.0 netmask 255.255.255.0 gw 192.168.7.1 dev eth3 pre-down route del -net 192.168.8.0 netmask 255.255.255.0 gw 192.168.7.1 dev eth3 pre-down route del -net 192.168.9.0 netmask 255.255.255.0 gw 192.168.7.1 dev eth3