# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).

# The loopback network interface
auto lo
iface lo inet loopback

auto eth0
iface eth0 inet dhcp

# VBoxNetwork: netc
auto eth1
iface eth1 inet static
	address 192.168.3.1
	netmask 255.255.255.0
	network 192.168.3.0
	broadcast 192.168.3.255
#	post-up route add -net 192.168.0.0 netmask 255.255.0.0 gw 192.168.1.1 dev eth1
#	pre-down route del -net 192.168.0.0 netmask 255.255.0.0 gw 192.168.1.1 dev eth1

# VBoxNetwork: nete
auto eth2
iface eth2 inet static
	address 192.168.5.2
	netmask 255.255.255.0
	network 192.168.5.0
	broadcast 192.168.5.255
	post-up route add -net 192.168.1.0 netmask 255.255.255.0 gw 192.168.5.1 dev eth2
	pre-down route del -net 192.168.1.0 netmask 255.255.255.0 gw 192.168.5.1 dev eth2

# VBoxNetwork: netf
auto eth3
iface eth3 inet static
	address 192.168.6.1
	netmask 255.255.255.0
	network 192.168.6.0
	broadcast 192.168.6.255
	post-up route add -net 192.168.0.0 netmask 255.255.0.0 gw 192.168.6.2 dev eth3
	pre-down route del -net 192.168.0.0 netmask 255.255.0.0 gw 192.168.6.2 dev eth3