# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).

# The loopback network interface
auto lo
iface lo inet loopback

auto eth0
iface eth0 inet dhcp

# VBoxNetwork: neta
auto eth1
iface eth1 inet static
	address 192.168.1.11
	netmask 255.255.255.0
	network 192.168.1.0
	broadcast 192.168.1.255
	post-up route add -net 192.168.0.0 netmask 255.255.0.0 gw 192.168.1.1 dev eth1
	pre-down route del -net 192.168.0.0 netmask 255.255.0.0 gw 192.168.1.1 dev eth1

#auto eth2
#iface eth2 inet static
#	address 192.168.2.2
#	netmask 255.255.255.0
#	network 192.168.2.0
#	broadcast 192.168.2.255
#	post-up route add -net 192.168.0.0 netmask 255.255.0.0 gw 192.168.2.2 dev eth2
#	pre-down route del -net 192.168.0.0 netmask 255.255.0.0 gw 192.168.2.2 dev eth2

#auto eth3
#iface eth3 inet static
#	address 192.168.3.3
#	netmask 255.255.255.0
#	network 192.168.3.0
#	broadcast 192.168.3.255
#	post-up route add -net 192.168.0.0 netmask 255.255.0.0 gw 192.168.3.3 dev eth3
#	pre-down route del -net 192.168.0.0 netmask 255.255.0.0 gw 192.168.3.3 dev eth3